300 Bently Dual Vibration and Gap Monitors Calibration and Repair in UAE
• The 3300 Vibration Monitor is a tool for detecting machine malfunctions such as rotor unbalance, misalignment, bearing wear, shaft cracks, and rubs.
• The monitor has two channels, A and B, providing information from two points on the machine.
• The OK LEDs indicate proper monitoring of the channel.
• The Alert LED illuminates when the first level of alarm is exceeded.
• The DANGER switch indicates the Danger Setpoints for both channels.
• The GAP switch provides Gap Voltage values for both channels and is read off the centre scale.
• The 3300/16 monitor has a special option that can alarm on a shift in gap.
• The right side of the scale corresponds to the B channel.
• The Bypass LED or Indication on each channel is normally extinguished.
• The switch will display the first level of alarm for both channels when used alone or with a vibration monitor equipped with an enabled Gap Alarm.
• Diagnostic engineers and instrument technicians use the Buffered Transducer outputs, bypassing the monitoring system and not affecting meter indications.