Expert Repair & Maintenance services for Industrial Instrumentation in the UAE
In the UAE's demanding oil, gas, and construction industries, minimizing industrial instrumentation downtime is critical. Whether managing high-pressure hydraulic systems in Abu Dhabi or operating sensitive calibration laboratories in Dubai, regular repair and maintenance of pressure tools ensure safety, compliance, and operational efficiency.
1. Pressure Generation & Hand Pump
Repairs
Portable hand pumps are essential for field calibration but commonly experience seal wear and valve leaks.
Pneumatic Pumps: Frequent seal replacements
are routine for Druck PV210 (low pressure), Druck PV211 (standard field pump),
and the high-stability Additel 916.
Hydraulic Pumps: High-pressure hydraulic
models such as Druck PV212 and Druck PV411A require specialized cleaning to
remove oil contaminants.
Base Stations: For modular systems,
maintaining the integrity of "Quick-fit" seals on Druck PV621, PV622,
PV623, and hybrid PV624 models is vital for pressure stability.
2. Calibrator & Reference Gauge
Servicing
Digital instruments demand professional diagnostics and certified recalibration to preserve accuracy.
Portable Calibrators: Authorized UAE
service centers specialize in overhauling Druck DPI 610E, DPI 611, and DPI 612.
The advanced DPI 620 Genii often requires firmware updates alongside physical
repairs.
Reference Gauges: Repairs for Druck DPI 104
(including intrinsically safe DPI 104-IS), DPI 705E, and the Additel series
(681, 685, 680A, and 686) are expertly handled.
Process Calibrators: Tools like Additel
672, Additel 227-HART, and laboratory standards such as WIKA CPG1500, CPG1200,
Fluke 2700G, and Additel 762 are calibrated to ISO/IEC 17025 standards after
any repair.
3. Industrial Hydraulic Pump Maintenance
Heavy-duty pumps from Enerpac and Hi-Force operate at pressures up to 700 bar and require robust maintenance.
Manual & Powered Pumps: Repairs cover
Hi-Force HP211, HP232, HPX series, Enerpac P142, P392, P80 manual pumps, and
electric/cordless models such as Enerpac ZU4 and XC1202MB.
Hydrotest Systems: Maintenance includes
air-motor seal inspection and high-pressure check valve servicing for Hydratron
Air Driven Pumps.
4. Primary Standard & Dead Weight
Tester Overhauls
Primary standards demand meticulous care to remain the master reference.
Dead Weight Testers: Cleaning and
piston-cylinder verification services for Budenberg BGH600, BGH700, BGH1200,
and BGH4000 series. Pneumatic models BGP120 and BGP2DP are also supported.
Master Gauges: Servicing for Budenberg
5214, 5314, 5414 test gauges, BG200, and comparators BGP120C, BGH1200C, and
BGH2600C is offered.
5. Process Gauges & Chart Recorder
Refurbishment
Analog instruments and chart recorders withstand harsh UAE environments.
WIKA Gauges: Dial and Bourdon tube repairs
for models 232.50, 233.50, 111.10, and 213.53.
Chart Recorders: Complete overhauls for
Barton 202E, 242E, 202N, Barton J8A; British Rototherm Clearscan, RPO, RTO,
Sentinel series; and stainless steel De Wit 4870SS, 4888SS, 4892SS.
6. Drilling & Rig Instrumentation
Repair
Rig-floor safety depends on accurate Martin-Decker (M/D Totco) instrumentation.
Weight Indicators: Repair and fluid
refilling for Martin-Decker Types D, E, EB, FS, and G.
Specialized Gauges: Calibration for GA
Series Mud Gauges, GM4 Compound Gauges, and GA114 Tong Pull Gauges.
Load Cell Servicing: Diaphragm replacement
and seal kits for Martin-Decker E80 Sensater, E160A, and E551 Compression Cell.
Reliable Instrumentation Support in the UAE
Expert repair & 17025 calibration for
Druck PV212, Enerpac P392, & Hi-Force pumps in UAE. We service Barton chart
recorders, Martin-Decker weight indicators, and Additel digital gauges. Fast
turnaround in UAE. Book your service!"